1 / 5
| Height | Length | Type |
| 3/4'' | 5' | Plain foot |
| 1'' | 10' | Plastic dip foot |
| 1-1/2'' | - | Plastic tip foot |
| 2'' | - | Metal plate foot |
| 2-1/2'' | - | - |
| 3'' | - | - |
| Height | Length | Type |
| 3/4'' | 5' | Plain foot |
| 1'' | 10' | Plastic dip foot |
| 1-1/2'' | - | - |
| 2'' | - | - |
| 2-1/2'' | - | - |
| 3'' | - | - |
| 4'' | - | - |
| 5'' | - | - |
| 6'' | - | - |
| Height | Length | Type |
| 3'' | 5' | Plain foot |
| 3-1/2'' | 10' | Plastic dip foot |
| 4'' | - | Plastic tip foot |
| 4-1/2'' | - | Metal plate foot |
| 5'' | - | - |
| 5-1/2'' | - | - |
| 6'' | - | - |
| Height | Length | Type |
| 3'' | 5' | Plain foot |
| 3-1/2'' | 10' | Plastic dip foot |
| 4'' | - | - |
| 4-1/2'' | - | - |
| 5'' | - | - |
| 5-1/2'' | - | - |
| 6'' | - | - |
| Height | Length | Type |
| 1'' | 5' | Plain foot |
| 1-1/4'' | 10' | Plastic dip foot |
| 1-1/2'' | - | Plastic tip foot |
| 1-3/4'' | - | - |
| 2'' | - | - |
| Height | Length | Type |
| 1'' | 5' | Plain foot |
| 1-1/4'' | 10' | Plastic dip foot |
| 1-1/2'' | - | - |
| 1-3/4'' | - | - |
| 2'' | - | - |
| Height | Type |
| 2'' | Plain foot |
| 2-1/2'' | Plastic dip foot |
| 3'' | Plastic tip foot |
| 3-1/2'' | Metal plate foot |
| 4'' | - |
| 4-1/2'' | - |
| 5'' | - |
| 5-1/2'' | - |
| 6'' | - |
RC#2 6/8 & 10/12
RC#3 16 & 20
RC#3 West Palm
RC#3 20 West Palm
Slab bolsters are used to support lower layer mesh or rebar in concrete slab construction, ensuring the reinforcement remains at the correct specified height during concrete placement.
The standard SB is used for the bottom layer of reinforcement, while the SBU (Upper) is designed to support the top layer of rebar by resting on the bottom layer or on formwork.
Plastic tips or dips are essential for architectural concrete or exposed slabs. They prevent rust from bleeding through to the concrete surface, maintaining a clean aesthetic finish.
Yes, our continuous wire products are standardly available in 5-foot and 10-foot lengths to accommodate various project scales and ease of installation.
We provide a wide range of heights from 3/4'' for slab bolsters up to 6'' or more for continuous high chairs, meeting almost any structural rebar requirement.
Yes, these wire supports are manufactured from high-quality steel wire designed to withstand the weight of rebar and the pressure of active concrete pouring without collapsing.
